MDO4000C

TektronixSKU: mdo4000c
No reviews

Price:
Sale price$6,900.00
Company Tektronix
Part Number mdo4000c
Form Factor portable
Bandwidth 200 MHz -1 GHz
Price Ranges $1000 - $10000 , $10000 - $100000
OS (Windows or embedded) Embedded OS
Max Sample Rate 1 GS/sec - 5 GS/sec , 5 GS/sec - 10 GS/sec
Channels 1 GS/sec - 5 GS/sec , 5 GS/sec - 10 GS/sec
Max Memory Depth 20 M
Waveform Update Rate/Max Trigger Rate 340,000 wfms/sec
Display size/Touch or non-touch screen 10.4 in. XGA color display
Vertical Resolution 8 bits (11 bits with Hi Res)
Instrument Integrations 16-channel logic analyzer
Trigger Modes Edge Positive, negative, or either slope on any channel. Coupling includes DC, AC, HF reject, LF reject, and noise reject. Sequence (B-trigger) Trigger Delay by Time
, =, ≠, or inside/outside a specified period of time. Timeout Trigger on an event which remains high, low, or either, for a specified time period (4 ns to 8 s). Runt Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. Logic Trigger when any logical pattern of channels goes false or stays true for specified period of time. Any input can be used as a clock to look for the pattern on a clock edge. Pattern (AND, OR, NAND, NOR) specified for all input channels defined as High, Low, or Don’t Care. Setup and Hold Trigger on violations of both setup time and hold time between clock and data present on any of the analog and digital input channels. Rise/Fall Time Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either. Video Trigger on all lines, odd, even, or all fields on NTSC, PAL, and SECAM video signals. Extended Video (optional) Trigger on 480p/60, 576p/50, 720p/30, 720p/50, 720p/60, 875i/60, 1080i/50, 1080i/60, 1080p/24, 1080p/24sF, 1080p/25, 1080p/30, 1080p/50, 1080p/60, and custom bi-level and tri-level sync video standards. I2C (optional) Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I2C buses up to 10 Mb/s. SPI (optional) Trigger on SS active, Start of Frame, MOSI, MISO, or MOSI and MISO on SPI buses up to 50.0 Mb/s. RS-232/422/485/UART (optional) Trigger on Tx Start Bit, Rx Start Bit, Tx End of Packet, Rx End of Packet, Tx Data, Rx Data, Tx Parity Error, and Rx Parity Error up to 10 Mb/s. USB Low speed (optional) Trigger on Sync Active, Start of Frame, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error. Token packet trigger - Any token type, SOF, OUT, IN, SETUP
, ≥, ≠ a particular data value, or inside or outside of a range. Handshake packet trigger - Any handshake type, ACK, NAK, STALL. Special packet trigger - Any special type, Reserved Error trigger - PID Check, CRC5 or CRC16, Bit Stuffing. USB Full speed (optional) Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error. Token packet trigger - Any token type, SOF, OUT, IN, SETUP
, ≥, ≠ a particular data value, or inside or outside of a range. Handshake packet trigger - Any handshake type, ACK, NAK, STALL. Special packet trigger - Any special type, PRE, Reserved. Error trigger - PID Check, CRC5 or CRC16, Bit Stuffing. USB High speed (optional) 1 Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error. Token packet trigger - Any token type, SOF, OUT, IN, SETUP
, ≥, ≠ a particular data value, or inside or outside of a range. Handshake packet trigger - Any handshake type, ACK, NAK, STALL, NYET. Special packet trigger - Any special type, ERR, SPLIT, PING, Reserved. SPLIT packet components that can be specified include ▪ Hub Address ▪ Start/Complete - Don't Care, Start (SSPLIT), Complete (CSPLIT) ▪ Port Address ▪ Start and End bits - Don't Care, Control/Bulk/Interrupt (Full-speed Device, Low-speed Device), Isochronous (Data is Middle, Data is End, Data is Start, Data is All) ▪ Endpoint Type - Don't Care, Control, Isochronous, Bulk, Interrupt Error trigger - PID Check, CRC5 or CRC16. Ethernet (optional) 2 10BASE-T and 100BASE-TX
Time Base Range 1 GHz models 400 ps to 1000 s
Time Scale Accuracy ±5 ppm over any ≥1 ms interval
Footprint 9.0 (h) x 17.3 (w) x 5.8 (d)

Description

You may also like

Recently viewed

Newsletter

Sign Up for our Test & Measurement Tips Enewsletter: